Home ->
Resources >
Support >
How to Install HRI Sensor to Sensus 620 Water Meter
< Back to Support

How to Install HRI Sensor to Sensus 620 Water Meter

Video: How to Install HRI Sensor to Sensus 620 Water Meter

Instructions

Required tools

  • T8 Torx screwdriver

Delivery parts for HRI

  • HRI Sensor
  • Bayonet ring
  • Cut meter lid
  • 2 screws
  • 2 screws seals
  • 1 adhesive seal

Step 1

Remove the round cover from the hinge.
  • Push the left side of the cover down.
  • Push the right side of the cover down.
  • Move the lid towards you
Step 1

Step 2

- Remove the aluminium foil from the bottom of the HRI
Step 2

Step 3

- Connect the back fitting ring to the Water Meter
- Turn the ring all the way clockwise (ca. 10°), (following by "click")

Step 3

Step 4

- Secure the fitting ring to the Water Meter
Step 4

Step 5

- Insert the two hooks of the HRI diagonally from above into the holes of the back fitting ring.
Step 5

Step 6

- Secure the HRI Sensor using two screws and two screw covers.
Step 6

Step 7

- Replace the cover with the supplied semicircular cover.
Step 7

The Final Result

Final result

The HRI should be protected with a seal against unauthorized taking off.

For more information or additional help, please contact us.

Manual
Sensus 620 Water Meter
DOWNLOAD
Manual
Sensus HRI Sensor
DOWNLOAD

Sensus Model 620 Water Meter

See More

Sensus HRI Sensor

See More