Home ->
Resources >
Support >
Talgil Filtron 10 - How to Enable or Disable Beep Sound
< Back to Support

Talgil Filtron 10 - How to Enable or Disable Beep Sound

How to Enable / Disable Sound on the Talgil Filtron 10 Controller

Note: This option is only available for newer versions (3.00 and up) - If your settings do not include the letter "b" the only way to turn off the beep is to remove the buzzer from the board.

On the SETTINGS screen, the last screen includes an option to edit the sound mode.

STEP 1

Go to the Settings screen ( Press and hold the ENTER button for 3 seconds).

STEP 2

Navigate to the Firmware version screen in SETTINGS, Press ENTER to skip to the next screen

The screen includes the "b" letter

STEP 3

To change the Sound mode, use the "+" and "-" keys,

Yes means - The controller will make a sound when the user presses any key. In addition, when the LCD is off (Controller on sleep mode), the controller makes a sound every 20 seconds.
No means - The controller will make a sound when the user presses any key. When the LCD is off (Controller on sleep mode), the controller does NOT make a sound every 20 seconds.

PDF - Download Icon
Filtron 1-10 User Manual
DOWNLOAD

BIC 100 Controller